Drain cleaning
We clear sinks, bathtubs, toilets and risers with a mechanical cable or hydro-jetting, without dismantling pipes.
from 150,000 UZSDetails
Toilet installation and replacement in Tashkent
A correctly installed toilet sits firmly, does not leak at the base and does not make noise while filling. The plumber removes the old fixture, prepares the outlet and water supply, installs the new toilet and checks every connection.
Installing a floor-standing toilet
We check the position of the sewer outlet, horizontal, vertical or angled, and select an adapter or flexible connector of the right length. The toilet is fixed to the floor with anchors and the base is sealed so water cannot get underneath.
We connect the flexible hose through a separate valve, adjust the float and flush mechanism and test the flush several times.
Concealed frame and wall-hung toilet
The frame is mounted on a load-bearing wall or inside a stud frame, levelled and set to height, and water and drainage are brought up to the cladding. This is renovation work and is best planned in advance.
Once the wall is clad with plasterboard and tiles, we hang the bowl, fit the flush plate and test the system.
Replacing an old toilet
Old toilets often sit on cement mortar and a cast-iron outlet. The plumber removes the fixture carefully, cleans the area and replaces the sewer branch section if necessary.
The old toilet is taken away by arrangement or left for disposal, as you prefer.
What the service includes
- Removing the old toilet
- Preparing the outlet and water supply
- Installing and fixing the toilet
- Connecting to drainage and water
- Adjusting the cistern mechanism
- Leak test
Cost of work
- Floor-standing toilet installationfrom 250,000 UZS
- Removing the old toilet and installing a new onefrom 300,000 UZS
- Concealed frame with wall-hung toiletfrom 600,000 UZS
- Replacing the cistern mechanismfrom 150,000 UZS
Prices cover a standard scope of work excluding materials. The exact price is confirmed after inspection and before work starts.
Questions about this service
How long does installation take?
Replacing a floor-standing toilet on a prepared spot takes about an hour and a half. A concealed frame takes from three hours, excluding finishing work.
Will any toilet fit my outlet?
No: outlets can be horizontal, vertical or angled. Take a side photo of your current toilet and the plumber will tell you which type fits.
Can a toilet be installed on tiles?
Yes, we fix it with anchors using chip protection for the tiles and seal the base.
Why does the toilet make noise while filling?
Usually the fill valve is worn or the pressure is too high. Replacing the cistern mechanism fixes it in half an hour.
Related services
Leak repair
We find the source of a leak under the sink, behind the toilet or inside a wall and fix it without unnecessary dismantling.
from 100,000 UZSDetails
Bathtub and shower installation
We install bathtubs and shower cabins, fit shower trays and sinks, and connect them to water and drainage.
from 200,000 UZSDetails
We visit every district of Tashkent
Choose your district to learn how we work there.
Order this service
Leave a request and we will clarify the details and agree a visit time.