Faucet installation
We replace dripping or seized faucets in the kitchen, bathroom or shower and connect them without leaks.
A badly connected machine is noisy, leaks and fails early. The plumber fits a valve and filter on the supply, sets up the drain correctly and runs a test cycle.
If water and drain outlets already exist, we connect the inlet hose through a separate valve and route the drain into a siphon with a non-return valve or into the sewer branch at the right height. The machine is levelled so it does not jump during the spin cycle.
We remove the transport bolts, which are often forgotten, and run a short programme to check everything.
When the machine goes in a new place, we run water from the nearest pipe with its own valve and a drain into the sewer with the correct slope and loop height. That protects against smells and backflow.
The piping is done in polypropylene or multilayer pipe, concealed or along the wall where possible.
We connect built-in and freestanding dishwashers under the kitchen sink: a valve on the supply, drain into a siphon with a branch and a check for leaks inside the cabinet.
If needed we replace the sink siphon with a model that has extra branches for appliances.
Prices cover a standard scope of work excluding materials. The exact price is confirmed after inspection and before work starts.
To existing outlets, about an hour. With new outlets, two to three hours depending on the distance to the pipes.
It is recommended: sand and scale from the pipes clog the machine's inlet valve. A coarse filter is inexpensive and protects the appliance.
Temporarily, yes, but the permanent solution is a drain into the sewer or a siphon with a non-return valve, otherwise you get smells and a risk of overflow.
Yes, including running new water and drain outlets.
We replace dripping or seized faucets in the kitchen, bathroom or shower and connect them without leaks.
We find the source of a leak under the sink, behind the toilet or inside a wall and fix it without unnecessary dismantling.
We clear sinks, bathtubs, toilets and risers with a mechanical cable or hydro-jetting, without dismantling pipes.
Choose your district to learn how we work there.
Leave a request and we will clarify the details and agree a visit time.